[ BEN Financials ]
200.SCH: YTD Revenue & Expense Total for Fund Groups
Documentation :|: BEN Balances Report Documentation :|: Quick View
* Return to Quick View List
Last Updated: 4/20/12
The 200.SCH report provides a fiscal-year-to-date summary of the
selected accounts, showing revenue and expense totals for each fund
group. It is a roll-up companion to the 210.SCH report, which
provides the full-outline budget format. The 200.SCH report provides
a summary of current period and year-to-date revenue and expense
activity within each fund group.
The report provides revenue & expense budget, actual,
encumbrance, and budget variance balances. Both period-to-date and
year-to-date balances are included. Percentages are provided to
compare fiscal-year actuals to budget amounts and to compare fiscal-
year actuals plus encumbrances to the current budget.
Several report options are provided as parameters to allow users
to select one or more fund groups for the report.
The report uses a matrix format. The balances are used to create
the columns and are read from left to right. The rows represent the
totals of all the object codes associated with the balances. The
sort order is controlled by a combination of page breaks and report
templates. Specific information regarding page breaks, sort order,
and templates for this report is described below.
The report options determine the page break, the first level of sort
order, and the level of aggregation for the report.
The 200.SCH offers six different
break options. The parameters section of this document shows which of the following choices are
available for each fund group.
1 by CNAC, Fund Group and Sub Group (CNAC/FG/SG),
2 by CNAC, Fund Group, Sub Group and Organization (CNAC/FG/SG/ORG),
3 by CNAC, Fund Group, Sub Group, and Fund (CNAC/FG/SG/FUND),
4 by CNAC, Fund Group, Sub Group, Organization and Fund (CNAC/FG/SG/ORG/FUND),
5 by CNAC, Fund Group, Sub Group, Fund & Organization (CNAC/FG/SG/FUND/ORG),
6 by CNAC, Fund Group, Sub Group, and Program (CNAC/FG/SG/FUND/PROG),
or N Not Selected.
The sub group breaks are applicable
only for those fund groups that have sub groups: General Operating
Funds (which includes General Purpose, Special Purpose Funds and Other Unrestricted
Designated Gift Funds (which includes Operating Gifts and Capital
Gifts). All page-break combinations will be presented in ascending
order, that is, the lowest combination of values to the highest.
This report uses templates to determine the fund groups and the
rows. Funds are aggregated into fund groups based on the Revised
Responsibility Center Management (RCM) Model. For more information
on how the fund groups are defined, see
Row templates are used to create the rows on the report. The row
template determines the order of the rows (e.g., revenue followed by
expense, salaries followed by employee benefit expense), the group
of object codes to be included in each labeled row (e.g., Travel
& Entertainment includes 520x and 521x), and the level of sub-totaling.
Template 5A is used to define the rows. In this report, balances are NOT
reported down to the object code level. Instead, each row contains
the sum of the balances for all of the object codes included in that
row. Only the revenue and expense totals and the section on the
bottom are included in this report. For more information on the row
templates used in this report, see
Note: Template 5A is a highly summarized version of
Template 1A with one difference-Template 5A shows Object Code 5505 (Service Center Cost Recovery)
separately, not included in the Expense total.
Reports 102.ORG, 103.ORG, 115.ORG, 201.SCH, and 211.SCH, which show
Grants and Contracts and URFs (and optionally Service Centers), use
Template 1C (or 5C). Templates 1C and 5C treat Overhead
On Sponsored Programs (i.e., Grant & Contract Overhead
differently than Template 1A, and this needs to be reconciled in order to go back
and forth between reports.
In addition to the Accounting Period (PERIOD NAME), the following
parameters are provided on this report:
Center LOW/HIGH (Required)
Enter the low/high values for the
NAC LOW/HIGH: (Required)
Enter the low/high values for the
Net Asset Class. All three Net Asset Classes are supported on this
report. To receive a separate report for each of the three net
asset classes, specify 0 as the low value and 2 as the high value.
In addition, two special “summary” NAC values are also
T : When this NAC value is specified, the
information on the report will be consolidated across all three
net asset classes for the specified school or center.
S : When this NAC value is specified, the information on the report
will be consolidated across the unrestricted and temporarily
restricted net asset classes only (NAC ‘0' plus NAC ‘1').
ORG LOW/HIGH: (Required)
Enter the Low/High values for the
ORGs to be included for the report; to report on all ORGs within a
school or center, specify the lowest ORG to the highest ORG in
This report can be used for any of the shaded fund groups shown
below. To select one or more fund groups to be reported, enter a
report option in the field next to the desired fund group(s) on
the Report Parameters screen. Multiple reports can be specified in a single request.
||General Funds and
|General Operating Funds
||General Purpose Funds
|Special Purpose Funds
|Other Unrestricted Funds
|Designated Gift Funds
|Sponsored Programs and
|Sponsored Program Funds
BREAK BY ORG PARENT INSTEAD OF ORG? (Y/N).
To use org parent processing, specify a parent org for the org low value,
choose report option 2, 4 or 5, and choose Y here. For more
information on org parent processing, see
The report heading includes the following information:
Indicates the chart of accounts segments used
to create the report break, depending on which report option was
chosen. The next line will show the chart of accounts values used
for this particular part of the report. The codes used for fund
groups, sub groups, and categories are shown on
Indicates the accounting period for which
information is being reported. Accounting period is specified as a
parameter when the report is requested.
The alphabetic descriptions associated with the
report break codes.
From left to right, the report columns will provide the following balances:
ORIGINAL BUDGET: The balance in this column is the total fiscal-year
planning budget. The source of data in the Original Budget column is the
file uploaded by the Budget Office at the beginning of
each fiscal year.
Special Note: In the ORIGINAL BUDGET column, the “Prior-Year
Cash Position (Surplus)/Deficit” row shows the budgeted prior-year amount,
not the actual amount.
CURRENT ANNUAL BUDGET: The balance in this column is the
fiscal-year-to-date operating budget, which is the Original Budget
plus or minus any budget changes from the beginning of the fiscal year up through
the specified accounting period. Any changes to the operating budget that have occurred
within the specified accounting period being reported will also be reflected
in this balance.
Special Note: In the CURRENT ANNUAL BUDGET column, the “Prior-Year Cash Position (Surplus)/Deficit” row
the actual prior-year amount, not the budgeted amount.
CURRENT MONTH ACTUALS: The balance in this column is the
period-to-date actuals for the specified accounting period.
FYTD ACTUALS: The balance in this column is the fiscal-year-to-date
actual, that is, the total activity from the
beginning of the fiscal year up to and including the specified
% ACT TO CUR BUDGET (xx% of FY): Two pieces of information are being provided:
- The figure in the heading (xx% of FY) indicates the percentage of the fiscal year that has passed.
- The data in this column is the FYTD Actuals divided by the amount in the Current Annual Budget stated as a percentage.
ENCUMBRANCES: The balances in this column represent all
outstanding encumbrances up to and including the specified accounting period.
% ACT/ENC TO CURRENT BUDGET: The data in this column reflect
the sum of the amounts in the FYTD Actuals and Encumbrance
columns, divided by the amount in the Current Annual Budget
column, stated as a percentage.
BUDGET BALANCE AVAILABLE: A calculated column that represents
the amount of operating budget dollars that have not been spent or
encumbered. The column is calculated as follows: CURRENT ANNUAL
BUDGET - (FYTD ACTUALS + ENCUMBRANCES)
Section At The Bottom:
On the 2xx.SCH reports, the cash position section at the bottom of
the report is completely populated for all funds, and for all break options, regardless of the BC.
The fiscal-year-to-date "Net Operating (Surplus)/Deficit" and
"Cash Effect of Other Current-Year Activity" are added to the "Prior-Year Cash
Position (Surplus)/Deficit" to provide the "Cumulative
Cash Position (Surplus)/Deficit."
In contrast, the 10x.ORG reports suppress the prior-year cash position in
certain situations. Therefore, the section at the bottom will not be the same for 10x and 2xx
reports run for the same orgs and funds.
Last Page Of The Report:
On the last page of every report, additional pieces of
important information are provided. We recommend that you keep this
parameters page with the report to document what accounts the report
REPORT PARAMETERS The parameters used to request the report are
printed on the last page as confirmation of what was requested. If
the account combinations returned to you in the report are not
what you expected, the report parameters list is a useful first
place to start. At a minimum, you can verify the range of values
you provided at the time you submitted the request.
REPORT BREAK - RESOLVED PARAMETERS The list provided here
represents the list of values within the range you provided as
Report Parameters that passed security verification. When a report
is submitted, ORGanization parameters that were provided are
compared against your BEN Financials security profile. All ORGanizations
in the range that match your profile will be returned to you in
This is a good second place to look if you did not get the
results you expected. Compare the list of ORGanizations in this
list against the parameter range you provided. If an ORGanization
is missing, chances are it does not exist in your security
ORG PARENT OVERLAP DIAGNOSTIC If you used org parent processing
in this report, a third section will appear that shows the orgs
that were included in each parent, and whether any of the
underlying orgs were included in more than one parent in this
report. For advice on what to do if you have overlaps, see